COFFIN Medium Nail Tips

COFFIN Medium Nail Tips – natural-looking length and elegant nail enhancements without glue

An elegant COFFIN shape does not necessarily mean exceptionally long nails. COFFIN Medium Nail Tips make it possible to create a uniform, natural-looking nail enhancement with tapered sidewalls and a straight free edge. Their medium length makes them a practical choice for clients who want a modern nail shape while preferring a more comfortable length for everyday activities.

The tips feature a natural C-curve and gently taper towards the free edge. Their flexible material adapts to the curvature of the natural nail and, when applied correctly, helps create a stable foundation for further nail enhancement. The clear design allows subsequent finishing with coloured UV/LED gels, gel polishes and various Nail Art techniques.

Unlike traditional glue-on tips, they do not have a defined adhesive area. They are not applied using nail glue or adhesive tabs. A suitable Rubber Gel or Sculpting Gel is used to attach them. Once cured, the tip remains on the nail as part of the enhancement and is not intended for reuse.

The COFFIN Medium version is shorter than COFFIN Long while retaining its characteristic tapered shape. It is suitable for quick nail extensions, strengthening natural nails and occasional nail enhancements. The finished look can be customised to suit the client's preferences.

Key features and benefits

• COFFIN Medium shape – medium length with tapered sidewalls and a straight free edge.
• More practical length – a shorter design compared with COFFIN Long for more comfortable everyday wear.
• Natural C-curve – supports a uniform appearance of enhanced nails.
• Flexible material – the tips adapt to the shape of the natural nail and resist cracking during normal handling.
• Clear design – allows further finishing with coloured gels, gel polishes and Nail Art decorations.
• No defined adhesive area – the tip is attached using a suitable modelling gel.
• Glue-free application – traditional nail tip glue and adhesive tabs are not required.
• Quick extension and strengthening – a practical alternative to building the entire nail length on a sculpting form.
• Suitable for infills – the enhancement can be adjusted and refilled as the natural nail grows.
• Single-use tips – once applied, the tip remains on the nail and is not intended to be removed and reused.
• 11 sizes – allow the selection of a suitable width for individual natural nails.
• Practical packaging – 550 tips in an organised storage box.

How does nail enhancement with COFFIN Medium tips work?

The application method resembles the Press On system but differs in one important way. While some Press On tips are attached using adhesive tabs and can be reused, COFFIN Medium tips are secured with modelling gel and remain on the nail.

Once cured, they provide a foundation for further finishing. The tip surface can be prepared for coloured gel, gel polish or Nail Art decorations, depending on the desired result.

As the natural nail grows, the enhancement can be refilled with a suitable gel. This means the tip does not need to be removed at every subsequent salon appointment. Infills can continue until the original tip has completely grown out, provided the condition of the enhancement allows it.

Recommended materials for application

Depending on the chosen working system, Rubber Gel or Sculpting Gel (Soak Off Gel) can be used to attach COFFIN Medium tips. The material is applied in a thin layer to the prepared natural nail and the inner contact surface of the tip.

During subsequent infills or adjustments to the nail structure, a builder gel can be used if necessary. For enhancements based on Sculpting Gel, Power Gel is recommended, for example. For shorter nails, Rubber Gels can also be used depending on the condition of the nails and the desired structure.

Recommended step-by-step application

1. Natural nail preparation: Perform a manicure, prepare the nail plate and thoroughly degrease it according to the procedure of the chosen nail enhancement system.
2. Size selection: Choose a tip that matches the width of the natural nail and fits correctly around the lateral nail folds.
3. Preparation of the inner surface: Gently roughen the inner contact area of the tip using a suitable fine drill bit or a foam buffer.
4. Base application: Apply a thin layer of the recommended Rubber Gel or Sculpting Gel to the prepared nail and the contact surface of the tip, following the chosen working procedure.
5. Tip placement: Gradually position the tip from the cuticle area towards the free edge. The material must spread evenly without trapping air bubbles.
6. Material check: Check the correct position of the tip and the amount of gel. The material must not overflow onto the surrounding skin. Remove any excess before curing.
7. Curing: Hold the tip in the correct position and cure the material in a suitable UV/LED lamp according to the gel manufacturer's instructions. Ensure sufficient light reaches the entire layer of material.
8. Refining the transitions: After curing, gently file away any uneven areas around the transition of the tip.
9. Surface preparation: If necessary, roughen the tip surface before applying further modelling or coloured materials.
10. Levelling the cuticle area: If a gap or uneven transition has formed between the tip and the natural nail, gently refine the area and, if necessary, apply Rubber Gel or Sculpting Gel over the entire nail surface.
11. Completing the nail structure: When using Sculpting Gel, a thin layer of suitable builder gel, such as Power Gel, can be added if necessary. With Rubber Gel enhancements, an additional builder gel layer may not always be required.
12. Finishing the base: After curing, remove the inhibition layer if necessary, refine the surface and eliminate minor imperfections.
13. Colour application: Apply the selected coloured UV/LED gel or gel polish and cure according to the manufacturer's instructions.
14. Final shine: Finish the enhancement with a suitable top gel.

Important: No air bubbles must remain between the natural nail and the tip during placement. The gel must not come into contact with the skin. Curing time depends on the material used, the lamp and the manufacturer's recommendations.

COFFIN Medium tip sizes and dimensions

The pack contains 11 sizes numbered 0–10. The individual sizes vary in length and width, allowing a suitable tip to be selected for different natural nail plates.

Recommendation: When choosing a size, consider not only the width but also the curvature of the natural nail. The tip must fit correctly without excessive pressure or gaps.

Removal and infilling of the nail enhancement

COFFIN Medium tips are not intended to be repeatedly removed and reapplied. Depending on the condition of the enhancement and the material used, removal or regular infilling can be chosen.

1. Removal using a remover

Removal using a remover is only possible if all the materials used, including the tip itself, are suitable for this removal method. Always follow the instructions provided by the manufacturers of the individual products.

1. Breaking the surface: Gently roughen and break through the top layer of the enhancement so that the remover can act on the removable material.
2. Remover application: Place cotton wool soaked in a suitable remover onto the nail and wrap it in aluminium foil, or use an appropriate removal accessory.
3. Processing time: Leave the remover to work according to the manufacturer's recommendations. An approximate time may be around 10 minutes, but this depends on the specific material.
4. Gentle removal: Carefully remove the softened material using a cuticle pusher and a fine nail file. If the material does not loosen, do not force it off.
5. Preparation before a new application: If you intend to continue with a new enhancement, prepare the nail according to the working procedure, for example using Pre Nail Prep Scrub.
6. Final care: If no new enhancement will be applied, treat the nail and surrounding skin with a suitable nourishing oil.

Professional tip: Before a new application, suitable care using the IBX system may be included according to the needs of the natural nail. Its use must follow the recommended working procedure and be compatible with the subsequent nail enhancement materials.

2. Infilling the grown-out enhancement

With regular infills, the original tip can remain part of the enhancement. The interval between infills depends on the growth rate of the natural nails, their condition and the stress placed on the enhancement.

1. Checking regrowth: Assess the condition of the enhancement, material adhesion and any lifting. After approximately 3–4 weeks, the regrowth area may measure several millimetres.
2. Refining the transition: Roughen the surface and gently file the transition between the regrown natural nail and the original enhancement.
3. Manicure and preparation: Perform a manicure, prepare and degrease the regrown area of the natural nail and adjust the length if necessary.
4. New base layer: Apply a suitable Sculpting Gel or Rubber Gel according to the same system used for the original enhancement.
5. Rebuilding the structure: Restore the correct nail shape and structure. Power Gel, for example, can be used over a Sculpting Gel base. For shorter nails, a Rubber Gel enhancement may be suitable depending on the chosen system.
6. Finishing: After curing, remove the inhibition layer if necessary, refine the nail surface and shape, and continue with coloured gel or gel polish followed by a top gel.

3. Gradual growing out of the tip

If the enhancement remains stable and free from lifting, regular infills can continue until the original tip has completely grown out. At every appointment, the condition of the natural nail and the adhesion of the material must be checked.

Pack contents

500 clear COFFIN Medium nail tips.

• Number of sizes: 11 (0–10)
• Total quantity: 500 pcs
• Shape: COFFIN Medium
• Colour: clear
• Packaging: storage box with separate compartments for each size
• Use: single-use, as part of the nail enhancement

Video – application demonstration

DENATO professional recommendations

Choosing the correct tip size and carefully preparing the contact surface are essential for successful application. The tip should naturally follow the shape of the nail and must not be forced into place.

During application, use an amount of gel that allows an even bond between the tip and the natural nail without air bubbles or material overflowing onto the surrounding skin.

During infills, always check that the original enhancement is still securely attached. Any lifted or damaged areas of material must be professionally removed and the nail correctly prepared again.

Material & safety

Design: clear, flexible nail tips intended for nail enhancements using suitable UV/LED gels. The tips are designed for single use and remain part of the enhancement after application.

For professional use only. During application, curing and removal, follow salon hygiene and safety procedures and the instructions provided by the manufacturers of the materials used.

• Do not use on damaged, irritated or otherwise unhealthy nails or surrounding skin.
• Before application, check that the tip is not cracked, deformed or otherwise damaged.
• Choose a size that matches the width and curvature of the natural nail.
• Do not attach the tip using nail glue or adhesive tabs when following the described gel application system.
• Avoid skin contact when working with uncured gels.
• Follow the recommended curing time and method for the modelling material used.
• Ensure that the gel underneath the tip is sufficiently cured. Uncured material must not remain trapped between the tip and the natural nail.
• The tips are not intended to be repeatedly removed and reused.
• Do not use force when removing the enhancement and never pull the tip away from the natural nail.
• Use only compatible products and procedures when removing the specific nail enhancement system.
• Follow hygiene rules and use clean working tools.
• Keep out of reach of children.