Green Flame Carbide Nail Drill Bit – Long-Lasting Fréza pro NailArt

Green Flame Carbide Nail Drill Bit – Long-Lasting – Professional Carbide Bit for Fast Removal of Gel and Acrylic Nail Enhancements

Green Flame Carbide Nail Drill Bit – Long-Lasting is a professional carbide drill bit designed for efficient removal of harder nail enhancement materials using an electric nail drill. Its coarse cutting teeth, elongated flame shape and single-direction design for right-handed technicians allow fast removal of gel and acrylic enhancements while maintaining control over the movement of the drill bit.

The working head features a distinctive elongated flame shape with a rounded tip. This profile allows the contact between the cutting teeth and the material being treated to be adjusted when working on different areas of an artificial nail enhancement. The coarse cutting teeth are primarily intended for faster removal of larger amounts of material, rather than delicate work on natural nails.

The drill bit features single-direction cutting teeth with a cross-cut design, intended for right-handed use. When the correct rotation direction, appropriate working speed and moderate pressure are applied, it enables effective removal of nail enhancement material.

The green identification band on the shank indicates a coarse-grade drill bit. The carbide construction provides a durable working tool for repeated professional use. Maintaining the performance and lifespan of the cutting teeth depends on proper working technique, compliance with permitted rotation speeds and appropriate maintenance.

Key Features and Benefits

• Carbide construction – durable drill bit designed for professional work with nail enhancement materials.
• Coarse cutting teeth – suitable for fast removal of gel and acrylic nail enhancements.
• Green identification band – indicates the coarse grade of the drill bit.
• Elongated flame shape – allows controlled removal of material from different areas of an artificial nail enhancement.
• Rounded working head tip – distinctive shape that allows the drill bit to be guided according to the surface being treated.
• Single-direction cutting teeth with cross-cut design – intended for right-handed technicians.
• Efficient material removal – helps speed up the removal of harder enhancement materials when used correctly.
• Long service life – carbide cutting teeth are designed for repeated use with appropriate care.
• 2.35 mm shank diameter – for electric nail drills with a compatible chuck system.
• Professional application – suitable for salon work when removing gel and acrylic materials.

When and How to Use the Drill Bit

The coarse flame-shaped carbide drill bit is primarily intended for procedures that require the removal of larger amounts of harder nail enhancement material.

• Removing gel nail enhancements – fast removal of cured builder gel.
• Removing acrylic nail enhancements – mechanical removal of hard acrylic material.
• Reducing enhancement thickness – gradual removal of excess material before further treatment.
• Working on artificial nail material – refining selected areas of an enhancement according to the specific working procedure.
• Professional use by right-handed technicians – the single-direction cutting teeth are designed for the corresponding working direction.

Important: This coarse carbide drill bit is not intended for use on natural nails, cuticles or surrounding skin. Take particular care when removing enhancement material near the natural nail plate.

Why Choose a Flame-Shaped Drill Bit?

The elongated flame-shaped working head combines a narrower rounded tip with a wider central section. This allows the contact area to be adjusted by changing the position of the attachment in relation to the enhancement material.

• Elongated profile – allows smooth movement of the drill bit when working on artificial nail enhancements.
• Narrower rounded tip – provides the possibility of more precise guidance on selected areas of the enhancement material.
• Wider central section – allows a larger contact area to be worked on when the attachment is positioned at a suitable angle.
• Coarse cutting teeth – make it easier to remove harder material without excessive pressure.

The shape of the working head alone does not guarantee safety when it comes into contact with natural nails or skin. Correct technique, controlled movement and respecting the intended purpose of the drill bit are essential.

Recommended Working Procedure

1. Preparing the workstation: Prepare a clean working environment and suitable dust extraction, and check the condition of the electric nail drill.
2. Inspecting the drill bit: Before use, check that the cutting teeth are not damaged, deformed or excessively worn.
3. Securing the attachment: Correctly insert the 2.35 mm drill bit shank into a compatible chuck mechanism and secure it according to the nail drill manufacturer's instructions.
4. Setting the rotation direction: Select the rotation direction corresponding to the single-direction cutting teeth designed for right-handed use.
5. Setting the working speed: The recommended optimal speed is 15,000 rpm. Do not exceed the maximum permitted speed of 20,000 rpm.
6. Removing enhancement material: Work with light, controlled pressure and smooth movements across the surface of the artificial material.
7. Monitoring the working area: Regularly check the amount of material remaining and avoid bringing the coarse cutting teeth close to the natural nail plate.
8. Preventing heat build-up: Do not keep the rotating drill bit in one place for an extended period. Stop working if uncomfortable heat or vibrations occur.
9. Finishing the procedure: Allow the nail drill to come to a complete stop before changing or removing the attachment.
10. Cleaning and maintenance: After use, remove material residue from the cutting teeth and carry out appropriate hygienic treatment.

Technical Specifications

• Product name: Green Flame Carbide Nail Drill Bit – Long-Lasting
• Product type: carbide drill bit for electric nail drills
• Material: carbide
• Working head shape: elongated flame with a rounded tip
• Coarseness: coarse
• Colour identification: green band
• Cutting tooth design: single-direction cutting teeth with cross-cut design
• Intended for: right-handed technicians
• Shank diameter: 2.35 mm
• Optimal working speed: 15,000 rpm
• Maximum permitted speed: 20,000 rpm
• Application: removal of gel and acrylic nail enhancements
• Not suitable for: natural nails, cuticles and skin

Recommended Working Speeds

These values represent the working parameters of this attachment. Always adjust the speed according to the material being treated, the technique used and the nail drill manufacturer's instructions. Never exceed the maximum permitted rotation speed.

Cleaning, Disinfection and Sterilisation

Regular and proper maintenance helps preserve the performance of the carbide cutting teeth, their service life and hygienic safety during repeated use.

1. Mechanical cleaning: After use, remove dust and nail enhancement material residue from the cutting teeth using a suitable cleaning brush.
2. Thorough cleaning: Clean the attachment using a procedure suitable for carbide tools.
3. Disinfection: Use a disinfectant intended for metal instruments and follow the prescribed concentration and contact time.
4. Sterilisation: Only sterilise using a procedure approved by the attachment manufacturer. If hot-air sterilisation is permitted by the manufacturer, do not exceed 180 °C.
5. Protecting the cutting teeth: Higher temperatures may negatively affect the hardness and service life of the cutting teeth.
6. Drying: The attachment must be clean and dry before storage or reuse.
7. Checking the technical condition: Regularly inspect the cutting edges, working head and shank. Do not continue using damaged or excessively worn drill bits.
8. Storage: Store the clean, dry drill bit separately from used tools and protect the cutting teeth against mechanical damage.

DENATO Professional Recommendation

The coarse carbide drill bit is designed for removing nail enhancement material, not for working on natural nails. The best control over material removal is achieved through the correct combination of rotation speed, smooth movement and light pressure.

When removing a thicker layer of enhancement material, work evenly and regularly check the remaining thickness. As you approach the natural nail, change your working procedure and use a more suitable, gentler tool.

To maintain the drill bit's long service life, regularly remove accumulated material residue from the cutting teeth, avoid overloading the attachment with excessive pressure and follow the recommended working speeds.

Material & Safety

Material and design: carbide drill bit with coarse single-direction cutting teeth, cross-cut design, flame-shaped working head and a shank diameter of 2.35 mm.

For professional use only. The drill bit is intended for removing gel and acrylic nail enhancements using an electric nail drill with a compatible chuck system. It is not intended for use on natural nails or skin.

• Only use electric nail drills with a chuck system suitable for a 2.35 mm shank diameter.
• Before starting the nail drill, check that the attachment is correctly and securely fitted.
• Insert the shank carefully into the chuck according to the nail drill manufacturer's instructions.
• Observe the single-direction cutting tooth design intended for right-handed technicians and use the corresponding rotation direction.
• The optimal working speed is 15,000 rpm.
• Never exceed the maximum permitted speed of 20,000 rpm.
• Work without excessive pressure and do not keep the rotating drill bit in one place for an extended period.
• Do not use the coarse drill bit on the natural nail plate, cuticles or skin.
• Do not use the attachment on injured or irritated skin.
• Use suitable dust extraction and appropriate personal protective equipment during work.
• Stop working immediately if excessive heat, unusual vibrations or discomfort occur.
• Only change the attachment when the nail drill has come to a complete stop.
• Exceeding the maximum rotation speed may damage the nail drill's chuck mechanism.
• Excessive pressure overloads both the micromotor and the nail drill handpiece and increases drill bit wear.
• After use, remove debris and carry out cleaning, disinfection and, where applicable, sterilisation according to the manufacturer's instructions and applicable hygiene procedures.
• If hot-air sterilisation is permitted by the manufacturer, do not exceed 180 °C. Higher temperatures may reduce the hardness of the cutting teeth.
• Before reuse, check that the attachment is clean, dry and undamaged.
• Do not use damaged, deformed or excessively worn drill bits.
• Keep out of reach of children.